Outdoor Furniture Frames
Chair frames, table bases, armrests, legs and connection brackets for outdoor seating and tables.
CUSTOM PARTSBent tubes · welded frames · connector plates · mountsOUTDOOR PRODUCT APPLICATIONS
Metal Structures for Outdoor & Leisure Products
Tent & Camping Supports
Tent poles, cross supports, roof frames, adjustable tubes and locking connectors.
CUSTOM PARTSTent poles · cross braces · hinge joints · locks
Canopy, Awning & Shelter Frames
Bent frames, wall mounts, tension rods and support assemblies for fixed or retractable shelters.
CUSTOM PARTSBent frames · wall brackets · pull rods · bases
Camping Carts & Portable Equipment
Folding cart frames, pull handles, axle mounts and compact support structures for outdoor transport and storage.
CUSTOM PARTSFolding frames · pull handles · axle mounts · braces
Hammocks, Swings & Leisure Seating
Hammock stands, swing supports, hanging-chair frames and reclining adjustment structures.
CUSTOM PARTSCurved supports · hanging mounts · pivots · base frames
Outdoor Lighting & Accessory Mounts
Lamp brackets, posts, bases and angle-adjustment connectors used around outdoor leisure spaces.
CUSTOM PARTSLamp brackets · posts · bases · angle jointsPARTS WE MANUFACTURE
Drawing-based Metal Parts for Outdoor Products
You do not need to source a complete product from us. A single bent tube, folding joint, bracket or complete welded frame can be reviewed as an individual project.
Bent Tubes & Frame Members
Round, square and special-section tubes with controlled bend profile, radius and end orientation.
Punched, Adjustable & Telescopic Tubes
Hole patterns, telescopic fit and adjustment positions made around folding or height-setting functions.
Brackets, Connection Plates & Bases
Laser-cut and bent L/U brackets, mounting plates, wall mounts and equipment bases.
Hinges, Pin Seats & Locking Parts
Rotating joints, pin connections, locating holes and locking features for repeated folding.
Welded Frames & Pre-assembled Modules
Fixture-located tube-to-tube and tube-to-sheet frames supplied as welded or pre-assembled modules.
Reinforcements, Pull Braces & Fixings
Gussets, clamps, pull braces and stress-point reinforcements used around outdoor frames.
WHY OUTDOOR PRODUCTS NEED DEDICATED CONTROLS
Targeted Controls from Structure to Finish for Outdoor Use Risks
Outdoor products are exposed to wind loads, rain, humidity, dust, temperature changes, repeated folding and transport. We apply targeted controls to load-bearing structures, connections, assembly accuracy, corrosion protection and packaging around the actual use environment.
Wind Loads & Uneven Ground
OUTDOOR RISK
Wind and off-center loads can cause a structure to sway or lose stability.
KEY CONTROL
Reinforce load-bearing sections, supports and ground-fixing details.
Repeated Use & Dynamic Loads
OUTDOOR RISK
Frequent opening, moving and loading can fatigue connection points.
KEY CONTROL
Strengthen welds, pivots and other critical connections.
Dust, Rain & Folding Wear
OUTDOOR RISK
Dust and moisture can accelerate wear or binding in folding mechanisms.
KEY CONTROL
Control moving clearances, telescopic fit and locking features.
Field Assembly & Hole Deviation
OUTDOOR RISK
Hole-spacing deviation can disrupt field assembly and accessory fit.
KEY CONTROL
Use locating fixtures and inspection to maintain hole and assembly consistency.
Water Ingress & Local Corrosion
OUTDOOR RISK
Edges, welds and water-trapping areas are often the first to corrode.
KEY CONTROL
Improve drainage, clean welds and tube ends, and match the corrosion protection.
Transport, Stacking & Seasonal Storage
OUTDOOR RISK
Transport friction and long storage can damage both finish and structure.
KEY CONTROL
Use corner guards, separators, anti-scratch materials and secure packing.
Material, structure, finish and validation are confirmed around the actual use environment and project requirements rather than one universal data set.
DRAWING-BASED CUSTOMIZATION
From Product Drawing or Sample Photo to Batch Production
For tents, outdoor furniture, shelters or other leisure products, start with drawings, photos or sample information. We first confirm the metal part scope, material, process, finish and quantity.
Send Your Files
Share 2D / 3D drawings, product photos, sample information, use environment and estimated quantity.
Review Structure & Process
We review tube, sheet, connections, welding, outdoor finish and possible risk points.
Prototype & Production
After confirmation, we quote, prototype when needed, then move to small-batch or volume production.
USEFUL FOR REVIEW
These Items Help Us Review Faster
If production drawings are not ready, photos or application notes are enough to start. More complete information supports a more accurate review.
OTHER APPLICATION INDUSTRIES
Explore All Other Application Industries
Browse related metal structures and part requirements across the other six application directions.
Furniture & Indoor Products
Table, chair and interior product frames, brackets and folding structures.
Agriculture & Garden Equipment
Carts, handles, brackets, guards and garden equipment frames.
Industrial Equipment
Equipment frames, guards, mounting parts and tube-sheet assemblies.
Fitness Equipment
Handles, adjustment tubes, welded bases and reinforcement parts.
Storage & Display Systems
Rack frames, shelf connectors, display structures and material carts.
Specialized Applications
Drawing-based metal structures for specialized products and equipment.
OUTDOOR PRODUCT PROJECT REVIEW
Send Your Outdoor Product Drawing, Photo or Sample
Whether it is a tent support, outdoor furniture frame, shelter structure, camping product or individual connector, we review material, structure, process, finish and quantity around the actual use environment.
Please provide if available:
- 2D / 3D drawing or sample photo
- Metal part supply scope
- Material, tube size, wall or sheet thickness
- Outdoor environment and finish requirement
- Critical assembly, folding or load requirement
- Prototype and estimated batch quantity
CONNECTED MANUFACTURING PATH
Continue through related products, capabilities and applications
Move from the relevant product and manufacturing capability to an industry application and practical engineering guidance.